Stroke corner issue

Started by Skryber, December 05, 2011, 03:08:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3
User actions

Skryber

#15
December 05, 2011, 03:37:08 PM
Quote from: t-pat on December 05, 2011, 03:34:47 PMalign stroke to center?

I created this purposely to have an outside stroke but it doesn't work anyway.
Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff

DigitalCrapShoveler

#16
December 05, 2011, 03:38:28 PM
Quote from: Joe on December 05, 2011, 03:34:03 PM
Quote from: DigitalCrapShoveler on December 05, 2011, 03:25:49 PMTook into Freehand. :laugh:

I thought you threw all the old junk software out? :tongue:

Just software and hardware that I don't use anymore. Like the 8 versions of Freehand before MX.
Member #285 - Civilian

DigitalCrapShoveler

#17
December 05, 2011, 03:39:36 PM
Quote from: Skryber on December 05, 2011, 03:37:08 PM
Quote from: t-pat on December 05, 2011, 03:34:47 PMalign stroke to center?

I created this purposely to have an outside stroke but it doesn't work anyway.

It is the handles that cause the weird stroke block-offs. I had to retract one to make it work on each instance.
Member #285 - Civilian

Skryber

#18
December 05, 2011, 03:43:22 PM
I see. You added anchor points and shortened up handles.
That makes sense.
Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff

Skryber

#19
December 05, 2011, 03:45:28 PM
This is what I'm creating. Except mine will have more symmetry.



Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff

DigitalCrapShoveler

#20
December 05, 2011, 03:50:58 PM
Quote from: Skryber on December 05, 2011, 03:43:22 PMI see. You added anchor points and shortened up handles.
That makes sense.

Yes, and because Freehand has better control of handles, at least for me... you understand.

Member #285 - Civilian

Ear

#21
December 05, 2011, 03:53:17 PM
Quote from: DigitalCrapShoveler on December 05, 2011, 03:50:58 PM
Quote from: Skryber on December 05, 2011, 03:43:22 PMI see. You added anchor points and shortened up handles.
That makes sense.

Yes, and because Freehand has better control of handles, at least for me... you understand.

I understand... you're used to controlling a short handle.  :hello:
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

DigitalCrapShoveler

#22
December 05, 2011, 03:56:20 PM
Quote from: Earendil on December 05, 2011, 03:53:17 PM
Quote from: DigitalCrapShoveler on December 05, 2011, 03:50:58 PM
Quote from: Skryber on December 05, 2011, 03:43:22 PMI see. You added anchor points and shortened up handles.
That makes sense.

Yes, and because Freehand has better control of handles, at least for me... you understand.

I understand... you're used to controlling a short handle.  :hello:

Sure, that's what it is. You and Curry having a circle jerk over there? :tongue:
Member #285 - Civilian

Ear

#23
December 05, 2011, 03:58:55 PM
 :laugh: NO.  :embarrassed:
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

DigitalCrapShoveler

#24
December 05, 2011, 04:01:31 PM
I'm pretty busy, too. Maybe next time.
Member #285 - Civilian

DigiCorn

#25
December 05, 2011, 04:53:27 PM
"There's been a lot of research recently on how hard it is to dislodge an impression once it's been implanted in someone's mind. (This is why political attack ads don't have to be true to be effective. The other side can point out their inaccuracies, but the voter's mind privileges the memory of the original accusation, which was juicier than any counterargument ever could be.)"
― Johnny Carson

"Selling my soul would be a lot easier if I could just find it."
– Nikki Sixx

"Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."
― Ernest Hemingway

Skryber

#26
December 07, 2011, 10:58:50 AM
Black background or white background? It's a white car.

Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff

David

#27
December 07, 2011, 11:07:18 AM
dunno... I kinda like the black one of the two, not sure if the white one would look better on the white car tho.

Here in Texas, we have to have 2 real license plates on our cars, it's the law.    :cry:
Prepress guy - Retired - Working from home
Livin' la Vida Loca

DigitalCrapShoveler

#28
December 07, 2011, 11:08:13 AM
Quote from: Skryber on December 07, 2011, 10:58:50 AMBlack background or white background? It's a white car.

They turned out nice. I like the black, but white would definitely show up better.
Member #285 - Civilian

Skryber

#29
December 07, 2011, 11:11:50 AM
Quote from: david on December 07, 2011, 11:07:18 AMdunno... I kinda like the black one of the two, not sure if the white one would look better on the white car tho.

Here in Texas, we have to have 2 real license plates on our cars, it's the law.    :cry:

Yeah that's how it is in Illinois. Many states you don't need it like where I'm at now in Indiana. Also we no longer need city stickers on our windshield. That's probably a Cook County thing.
Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff
Print
Go Up Pages 1 2 3
User actions