Hi! """i;m back""""'

I' studying  Academy of Arts here in Albania,Design branch, actually i have the highest average of grades in Academy , (10.0) and maybe one day i will continue mastering in professionally higher University here in Europa!

my question is:

what University in europe you would suggest me to master Design?
and what kind of results do i have to take in my university to aply there?

hi
i've just quit job as prepress operator after two years,
after two years working i quited so its note quite good feeling

any opinions on this

I want your opinion about buying new harlequin rip
i have heidelberg linotype hell imagesetter with speedway interface
i want somebody to tell me what type of rip do i need and tell me about the
prices.
i'm located in Kosovo,near macedonia or albania so if somebody has any
used rip to sell please contact me:kushtrim_h2009@live.com
or  phone:+38644683185

Your thoughts?

Is this a silly question!!
I dont know, but i really want to know, why sometimes things dont go in the  way you have planed it??always something  interrupt and get in your way.
And the worst thing is when you are under pressure,?
I have a test in the end of the other month, and the criteria to pass it is very high
and if i dont pass it i cant go to university, and everything will be screwed.
Have you ever been to high school?  did you had these problems

Hi buddies!
WebDesign or Prepress?
I need your thoughts in this.
I'm finishing  high school and I intend to go to university of graphic  design?
and sooner or later I will open a graphic studio of my own, But I dont know If i should stuck more with prepress Services or Web services(I'll do them both)but which  do you think is more important in the future?
And what do you think about the University in graphic design branch, there still learn how to print in with engravings, i think finishing University is just to have a nice Diploma hanged in the wall(Experience above all).

i've formated my  delta tower HD(i connected it with pc using SCSI card of my rip)
but when i start delta control it shows only this:DELTA TOWER: initializing (it stays like this for hours)
and in event log it says DELTA TOWER DEVICE DRIVER NOT LOADED:OFFLINE MODE IS ACTIVE

I've just upgradet to preps 6.0, its really more easy and flexible to use but i dont know how to add individiual cropmarsks in pages like i used to do in classic preps(modify template page)
Does anyone knows it?

i've just purchased signa station 4.5.10,
but i found very hard to understand  schemes,
its very complicated and its not like in preps where you have full controll over schemes,
You only have controls over columns and rows,and i dont where to change the size of schemes
and for what format...
Anyone who knows how to create schemes in signa post a comment!
For example creating scheme for 74pages magazine in sepparate signatures

Hello there!
I have a question:
Can i take the scsi card which is located in my rip and put it in a simple PC
and then connect scsi cable of delta tower in pc and use computer as a rip.
 is that possible? :undecided:

Hi i have a question for all who have experience with configuring Heidelberg imagesetters,Delta towers and RIPS.
I have Heidelberg linotype hell classic with delta tower and RIP.
IN RIP i have delta techn.6.0 installed and windows NT servicepack6.0 operating system.
My question is How to Configure all system from beginning,I have all Heidelberg books but they dont describe it exactly step-by step.
I need to learn this steps:
1:Installing Windows Nt
2:Installing Delta technology
3:Configuring with windows nt output utility
4:Connecting RIP with Delta Tower and imagesetter etc

If needs anything more to reconfigure Rip You may tell

Regards :cheesy:

Does anyone selling Heidelberg used parts, in my case:DELTA TOWER
My contacts are in Europe

I know guys i'm bothering you with the same posts but error doesnt seems to move away.
Here is me my problem with "good old "Delta Tower:
Heidelberg linotype hell,Delta technology 6.0
I start delta control(Autoflow)In the event shows that Delta Tower does not give the willingness to start:
 1. 1. Generator - Intializing...
 2. 2. Interpreter - Intializing...
 3. 3. Delta Tower - Not Initialized.
 4. 4. Image Setter - Offline
 5. 5. Print Manager - Idle

  Then after Somehow i start DeltaRip(Booting complete system several times :angry:)
   I send Postscript To Rip(In my case delta autoflow)Rip doesnt recognise my         
   postscripts Then i look to print manager Window and it says"An error occured in   
   postscript file,internal software error...)THIS ERROR APEARS EVEN TO POSTSCRIPTS FILES THAT I PRINTED BEFORE TO THE SAME RIP,SAME PROCEDURE and it worked well
   but now suddenly all went wrong
   Can someone just Tell me is this An software error(Like configuring Rip,or reinstalling delta technology...)Or Hardware error(To Delta Tower OR RIP).

Thanxx to all  for your support
GREETINGS :azn:
 

"Delta Tower:error during delta tower configuration"
PLEASE GUYS HELP i keep receiving this error
i checked all my cables,speedway cable and scsi cable but all keeps fine
a dont have any idea what cousing this error.
always when i restart RIP ore delta tower this messeage apears and then i should
restart imagesetter from begining aint no other :embarrassed: :embarrassed:
HEIDLEBER LINOTYPE HELL,Delta tower

Hi everyone i have ahuge problem here ,i have heidelberg imagesetter
with delta tower
my problem is when i start my rip it appears this error"Delta Tower:error during delta tower configuration"
any help please

I bought new plateburner and i put it in my office its all fine
but i dont know if this is safe or not you know any irradiation or anything

Hello
I use preps so i need to know more about this software,any link ore
training advice would be greatful :cheesy:

Hello I'm wondering where to find training for signa station
becouse its very complicated software and i need  to learn it :azn:

Hi can every one tell me where to find manual for my heidelberg herkules linotype hell pro
imagesetter

Hi can every one tell me where to find manual for my heidelberg herkules linotype hell pro
imagesetter