p01 Kansas City Southern
Skip to main content

Recent Topics

xx
Xmpie or Fusion Pro
by pspdfppdfxhd
Today at 05:33:11 PM

xx
Add filename without extension
by Kermy812
Today at 05:15:46 PM

xx

xx
Preflight for black text
by mattbeals
October 19, 2018, 05:30:23 PM

xx
Only took 30 years
by david
October 19, 2018, 04:51:36 PM

xx
Lotem 800 quantum ii waterless to conventional
by mantman
October 19, 2018, 04:19:21 PM

xx
Need a good scanner for Mac High Sierra
by Farabomb
October 19, 2018, 03:30:28 PM

xx
Pistop Preflight Reports
by Joe
October 19, 2018, 11:09:16 AM

xx
InDesign Export to .txt
by Joe
October 17, 2018, 06:51:59 PM

clip
How to make type into single stroke for engraving
by david
October 17, 2018, 03:25:22 PM

xx
Metal Plate Hanging Tab Thingies
by Farabomb
October 17, 2018, 02:23:14 PM

clip

xx
Acrobat excessive RAM usage
by Joe
October 12, 2018, 06:20:51 PM

Topic: Curves & linearisation (Read 1235 times) previous topic - next topic

Curves & linearisation

Wondering if any one can help me out. I need to find out the linearisation of the plate from an old Prinect Signa Station (Ver 11) so we can have a starting point for our new imposition software setup. Seeing as I'm not at all familiar with Prinect does anybody know where these may reside in the system? info on any Characterisation curves would also be appreciated. 

Cheers
You can’t polish a Turd, but you can roll it in glitter!

Re: Curves & linearisation

Reply #1
Curves & Linearization should not be in Signa Station forum.
It depends on your setup.
We have Meta Dimension with calibration Manager that you use to create and tweak curves, etc...
Whoever set it up might have set folder with curves and configurations wherever.
Easy way would be to launch Calibration Manager, select Curve or Linearization and choose "Export".
Hopefully that will bring you to last folder used.
I hope his helps

Re: Curves & linearisation

Reply #2
Yes your correct Zox, I posted in the wrong section, but ultimately received your answer that led me to a path to recover the information that I required. Hats off to you.

Just for a bit of background info, I needed the curves and Linearisation as we have acquired this company and now need to integrate it with our existing prepress setup. Or at least that is what I am trying to do.

I've got my fingers crossed as we all know what should be achievable is not always achievable.


You can’t polish a Turd, but you can roll it in glitter!

 

Re: Curves & linearisation

Reply #3
I think there is a lot of the same going around, we've been going through similar acquisitions and integrations for several years now.
I don't see a sign of it stopping, you stop, you die :)

Anyway, good luck with your integration.
Let me know if I can help somehow, we have Printready, Prinergy and at the other location Printready, Prinergy and Esko.