Recent

Author Topic: SCREEN 8600S  (Read 12331 times)

0 Members and 1 Guest are viewing this topic.

Offline Tracy

  • Ninja Master
  • **
  • Posts: 8224
  • Gender: Female

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #16 on: July 13, 2021, 04:17:05 PM »
OK. Thanks to Tracy and born2print We've got the tail clamps loaded properly! But...now we got a new error.  :facepalm:  :strangle:

E4128 Mechanical Error - No balancer has been detected by the balancer search sensor.

E5168 Mechanical Error - The drum is rotated to "balance pin before inserted" but status of Servo controller (SVC) is not changed to "Ready".

Anyone wanna take a crack at interpretation? (Tech is schedule for tomorrow...so...no big deal ...just brownie points if we get farther than this..)


Quote from: born2print
great info they shared!...etc etc
that sounds like what you would do for the trendsetter also

I'm sure you saw these already but just in case


Offline born2print

  • Post count: purtygood
  • Supreme Ninja
  • ***
  • Posts: 12776
  • Gender: Male
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #17 on: July 13, 2021, 04:25:01 PM »
Reboot the entire system and hardware?
Some devices like that work themselves into a tizzy and need a fresh start after solving an issue or two.
He stated their PDF's are 99.9% accurate and I replied we prefer 100% accuracy.

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #18 on: July 14, 2021, 09:21:51 AM »
Reboot the entire system and hardware?
Some devices like that work themselves into a tizzy and need a fresh start after solving an issue or two.

Well after a few reboots / tries at loading a plate, still getting those weird errors. The tech is supposed to be here today. I'll let everyone know conclusion to the story after he's done. (Paul Harvey)
Thank you for everyone's help!  It shall be interesting what the true fix is.


-Tim

Offline Tracy

  • Ninja Master
  • **
  • Posts: 8224
  • Gender: Female
Re: SCREEN 8600S
« Reply #19 on: July 14, 2021, 03:41:20 PM »
yeah let us know!!

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #20 on: July 14, 2021, 05:26:36 PM »
Well, tech was here for a few hours. Cleaned out some of the machine and current diagnosis is the board that drives the servo / drum brake is currently bad. Part is ordered and hopefully will be in tomorrow! Stay tuned...

-TimJ

Reboot the entire system and hardware?
Some devices like that work themselves into a tizzy and need a fresh start after solving an issue or two.

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #21 on: July 19, 2021, 11:16:02 AM »
Well parts didn't arrive in time for last week..so we've got parts in hand and hopefully will have a fix today!
Stay tuned...(Harvey)



Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #22 on: July 19, 2021, 05:50:28 PM »
We are now in the "lightning zone". We've changed 2 or 3 boards so far? (Who cares after 1 eh?) The tech mumbled "this sure seems like a lightning strike". (Why didn't my poor Ricoh machines not get obliterated? You wink at them and they "fry")... More parts yet to arrive.

Tomorrow the story continues.

 :blowup:  :zap:
« Last Edit: July 19, 2021, 05:57:10 PM by slimtim301 »

Offline Tracy

  • Ninja Master
  • **
  • Posts: 8224
  • Gender: Female
Re: SCREEN 8600S
« Reply #23 on: July 20, 2021, 01:48:43 PM »
ai Yai Yai!

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #24 on: July 21, 2021, 09:43:55 AM »
OK. After swapping 2 or 3 boards. They found one that had a burnt chip! PIO board I think he called it?

We've burned multiple plates since then and so far so good! H00rah!  :aljolson:

Thank you again for all who provided input as we worked through the issues! :D

-TimJ

Offline Tracy

  • Ninja Master
  • **
  • Posts: 8224
  • Gender: Female
Re: SCREEN 8600S
« Reply #25 on: July 21, 2021, 02:21:25 PM »
Yay! back in bidness

Offline pspdfppdfxhd

  • Ninja Member
  • *
  • Posts: 2955
  • Gender: Male
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #26 on: July 22, 2021, 11:41:51 AM »
OK. After swapping 2 or 3 boards. They found one that had a burnt chip! PIO board I think he called it?

We've burned multiple plates since then and so far so good! H00rah!  :aljolson:

Thank you again for all who provided input as we worked through the issues! :D

-TimJ

Hey! Where did yo get the dancing dude? Funniest one I've seen since the dancing banana :banana:

Offline Joe

  • Master of Nothing
  • Administrator
  • Ninja Warlord
  • *****
  • Posts: 38500
  • Gender: Male
    • B4Print.com
  • Gender: male
Re: SCREEN 8600S
« Reply #27 on: July 22, 2021, 12:42:52 PM »
 :aljolson: :aljolson: :aljolson: :aljolson:
Mac OS 11.4 Big Sur | Prinergy 9.0.1 | Adobe Creative Cloud 2021 | TWO Fuji CTP Units

I'm Sorry I Hurt Your Feelings When I Said You Were Stupid. I Honestly Thought You Already Knew

Offline pspdfppdfxhd

  • Ninja Member
  • *
  • Posts: 2955
  • Gender: Male
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #28 on: July 22, 2021, 03:57:30 PM »
 Wow, i had no idea those were there!  :zounds:

Offline pspdfppdfxhd

  • Ninja Member
  • *
  • Posts: 2955
  • Gender: Male
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #29 on: July 22, 2021, 04:02:06 PM »
 :cold3: I did that once myself. My mom almost ripped my tongue off!