B4Print.com
General Category => General Prepress => Topic started by: danydany on December 19, 2017, 10:01:56 AM
Hi :hello: ,everyone,im new to prinergy and i try to find out what is the neutral density that will make a spot color to always be choked.
To be more exact i use a pantone [100 C] that is printed as white spot colour on press and i want to always white to be choked under any colour combination and density.
You might play with: refine / trap / select CREATE CUTBACKS then play with the numbers
Sorry for late reply,i was on holidays,i test it and work exactly how i wanted,Thank You :banana:
One more thing,seems that if i have vectors and pixels {picture} in same file it works only on vectors and don't choke the white under the pictures
Check the "Images' box as shown here:
Still no change to pantone (white) under the image,only vectors are affected,i have play with the neutral density and got some interesesting results on the image but no succes on just chocking the pantone under it
I have play more with the numbers there and i got it work,Problem solved,Thanks alot born2print and Joe :wink: