<use trap setting from input file if present> not supported error

Bugs · April 12, 2010, 04:12:40 PM

Anyone get this error and if so where in the hell can you turn "use trap setting from input file if present" off?

Farabomb · April 12, 2010, 04:29:59 PM

I do occasionally get a trapping error and if I shut down acrobat it tends to go away. I don't think it's that exact error but having acrobat open causes trapping issues here. In the process template turning on retrap trapped pages might help.

Rob.Morgan · April 15, 2010, 06:57:06 PM

This is an old setting that was present in the days when Prinergy used the Heidelberg trapping engine. You must be using an old Process Template that had the option turned on and now since that feature has been removed, there is no place to disable it. The easiest solution is to create a New Process Template from scratch and set it up with the same settings as your current template.

Cheers,
Rob Morgan
Applications Specialist
Kodak

Bugs · May 04, 2010, 02:48:13 PM

Thanks Rob. I'll check that out. Hey I have another post on here about printing to an epson 9600 from prinergy, I need to know if it is possible or not w/o a 3rd party rip. Who better than an application specialist to ask. Thanks again.

Joe · May 04, 2010, 03:17:07 PM

I'm not an application specialist but if you install the printer on the Prinergy server I believe you can then set up a process template to print to it.

Bugs · May 04, 2010, 03:24:09 PM

Thank Joe, but I tried that and couldn't get it to work.

Joe · May 04, 2010, 03:26:37 PM

What version of Prinergy do you have? I have setup a couple of HP LaserJets with Prinergy 5 this way and it works. Haven't tried it with an Epson though.

Farabomb · May 04, 2010, 03:49:08 PM

I remember needing the Epson tool in order to install the 9800 when we got prinergy. The kodak guys were scratching their heads for a day on that one.

Bugs · May 04, 2010, 05:30:17 PM

It's Prinergy 4 and there is a printer driver in the process template for HP. Nothing for the Epson.

Joe · May 04, 2010, 05:42:27 PM

These were included with the Prinergy 5 install. Haven't used them though as we do not have any Epsons. I can send you the PT's if you think they will work with Prinergy 4.

Bugs · May 04, 2010, 06:50:49 PM

I could give it a try. Thanks Joe.

Joe · May 04, 2010, 07:48:39 PM

Quote from: Bugs on May 04, 2010, 06:50:49 PMI could give it a try. Thanks Joe.

Ummmm...now that I said that, does anyone know how to export process templates?

Bugs · May 05, 2010, 04:56:57 PM

Thats ok. I have a kodak guy coming in on friday to yell at.

Rabid · May 05, 2010, 06:32:36 PM

We had a 9600 hooked up to Prinergy a while back. Seems to me we did an imposed proof out to a Hot folder and the 9600 picked up the files from there.

David · May 06, 2010, 06:53:52 AM

Quote from: Joe on May 04, 2010, 07:48:39 PMUmmmm...now that I said that, does anyone know how to export process templates?

one would think you would click on the Export button and then navigate out to where you keep the process templates, then click ok.
it's that easy

:laugh: :laugh: :laugh:

News:

<use trap setting from input file if present> not supported error