Recent

Author Topic: SCREEN 8600S  (Read 11935 times)

0 Members and 1 Guest are viewing this topic.

Offline kirami

  • New Member
  • *
  • Posts: 8
SCREEN 8600S
« on: May 02, 2016, 10:52:59 PM »
How to set the automatic unload of plate at the back thru the conveyor??

Offline DigiCorn

  • Terrorizing humans since 1971
  • Supreme Ninja
  • ***
  • Posts: 15911
  • Gender: Male
  • There is no Dana, only Zul!
    • Clerks.
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #1 on: May 02, 2016, 11:22:52 PM »
take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.
"Selling my soul would be a lot easier if I could just find it."
– Nikki Sixx

“Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”
― Ernest Hemingway

Offline kirami

  • New Member
  • *
  • Posts: 8
Re: SCREEN 8600S
« Reply #2 on: May 03, 2016, 05:57:14 AM »
Quote from: DigiCorn date=1462245772 link=msg=279586

take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.


That is working what i mean is after recording the plate should be unloaded automatically in the back through the conveyor. how to set like that?

Offline Ear

  • Fiya wata
  • Supreme Ninja
  • ***
  • Posts: 16314
  • Gender: Male
  • Nice Marmot, Man
Re: SCREEN 8600S
« Reply #3 on: May 03, 2016, 03:32:08 PM »
Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Offline kirami

  • New Member
  • *
  • Posts: 8
Re: SCREEN 8600S
« Reply #4 on: May 04, 2016, 04:18:15 AM »
Quote from: Ear date=1462303928 link=msg=279604

Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.

yes please.

Offline Ear

  • Fiya wata
  • Supreme Ninja
  • ***
  • Posts: 16314
  • Gender: Male
  • Nice Marmot, Man
Re: SCREEN 8600S
« Reply #5 on: May 04, 2016, 12:55:06 PM »
This is a picture of my interface screen, on the PT-R8600 (Fuji T-9000). The arrow at the right of the schematic shows a plate actively unloading through the back slot, to the conveyor for developing and stacking.

I am currently (in the picture) running full automation, from the cassette to stacker. Preload is off but it still semi-preloads, as long as my tiff catcher is actively sending. Full P-Load gains me about 6 plates per hour (to 24 from 18), 8-up size plates. I turn P-Load off when switching cassette sizes to save hassle.

This is a still shot but at 6% burn, the big wheel at bottom-right is animated and turning. The arrow at back blinks while the plate is unloading and the top arrow indicates loading a new plate.
« Last Edit: May 04, 2016, 01:00:41 PM by Ear »
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Offline andyfest

  • Know your role and shut your hole...
  • Ninja Member
  • *
  • Posts: 1609
  • Gender: Male
  • 100% Canucklehead
  • Gender: male
Re: SCREEN 8600S
« Reply #6 on: August 12, 2016, 08:22:30 AM »
Speaking of Screen 8600's we are having problems unloading plates. I found this article at PP that describes our problem to a tee:
http://printplanet.com/forum/prepress-and-workflow/screen/16466-problems-unloading-plates-on-screen-pt-r-8600

Looks like we need to replace a relay (PTR 8600 Relay for Brake - the new part number is: 100090068V00 instead of: 151162) for the drum brake, but I'm having a hard time location the relay in question. Does anyone have a service manual for the 8600 or know where the hell this relay is?
:banghead:
Fairly recent Adobe Creative Cloud, Versa RIPs, Flexi Cut RIP, couple of Roland wide format printers, Seal 60+ laminator + another old laminator that I hate, vinyl cutter and knives....lots of knives

Offline Ear

  • Fiya wata
  • Supreme Ninja
  • ***
  • Posts: 16314
  • Gender: Male
  • Nice Marmot, Man
Re: SCREEN 8600S
« Reply #7 on: August 12, 2016, 12:12:05 PM »
Yes, I think I do. I'll dig around and see if I can find it. Standby...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Offline Ear

  • Fiya wata
  • Supreme Ninja
  • ***
  • Posts: 16314
  • Gender: Male
  • Nice Marmot, Man
Re: SCREEN 8600S
« Reply #8 on: August 12, 2016, 12:20:44 PM »
https://www.dropbox.com/s/e55vp0pkllxjgsk/Screen%20PTR8000%20service%20info.zip?dl=0

Linky. This is mostly ole PT-R8000 stuff, but the Service Drawing 8100 PDF is also valid for most of the 8600. It even says 8600 when you look at the drawings, and I have used these to fix my 8600. Hopefully it helps...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Offline Ear

  • Fiya wata
  • Supreme Ninja
  • ***
  • Posts: 16314
  • Gender: Male
  • Nice Marmot, Man
Re: SCREEN 8600S
« Reply #9 on: August 12, 2016, 12:24:31 PM »
... Look in the Service Amend Manual, within that ZIP folder. Pages 29-40s show troubleshooting sequence for 8600, as well as a labeled drawing, showing parts and locations. I used this to track down a faulty solenoid not long ago. Put your fuckin' propeller hat on, bro...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Offline andyfest

  • Know your role and shut your hole...
  • Ninja Member
  • *
  • Posts: 1609
  • Gender: Male
  • 100% Canucklehead
  • Gender: male
Re: SCREEN 8600S
« Reply #10 on: August 16, 2016, 08:15:42 AM »
Many thanks Ear! I'll update when I have time later but the machine is fixed. The manual helped me to track down a faulty relay.  :banana:
Fairly recent Adobe Creative Cloud, Versa RIPs, Flexi Cut RIP, couple of Roland wide format printers, Seal 60+ laminator + another old laminator that I hate, vinyl cutter and knives....lots of knives

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #11 on: July 13, 2021, 10:01:12 AM »
... Look in the Service Amend Manual, within that ZIP folder. Pages 29-40s show troubleshooting sequence for 8600, as well as a labeled drawing, showing parts and locations. I used this to track down a faulty solenoid not long ago. Put your fuckin' propeller hat on, bro...

Hey Ear!,

I'm trying to figure out how to mount my tail clamps on my PT-R 8000. Do you still happen to have that service manual? Much appreciative of your time.

-TimJ

Offline Tracy

  • Ninja Master
  • **
  • Posts: 8221
  • Gender: Female
Re: SCREEN 8600S
« Reply #12 on: July 13, 2021, 02:50:17 PM »
Don't know anything about screen but
Did the clamps go out of position?

Offline slimtim301

  • New Member
  • *
  • Posts: 9
Re: SCREEN 8600S
« Reply #13 on: July 13, 2021, 02:58:25 PM »
We've been having our smaller (26") plates get jammed on removal / ejection from drum. (after burning etc)

So we removed the tail clamps from the drum and cleaned / inspected them, (not too dirty!...) but we were struggling to get them mounted in the proper spot on drum for loading back in machine.

I've done way too much Googling and can't find the proper steps for it. Appreciate any insight you have.

-TimJ

Don't know anything about screen but
Did the clamps go out of position?

Offline born2print

  • Post count: purtygood
  • Supreme Ninja
  • ***
  • Posts: 12768
  • Gender: Male
  • Gender: undisclosed
Re: SCREEN 8600S
« Reply #14 on: July 13, 2021, 03:36:48 PM »
With our Magnus, you have to position the clamps "all the way UP" so the sensors see them and are happy...
HTH
He stated their PDF's are 99.9% accurate and I replied we prefer 100% accuracy.