B4Print.com

General Category => CTP - CTF => Topic started by: chelios99 on April 19, 2021, 09:46:27 AM

Title: E0133: Time-out error has occured when punch 3 is activated
Post by: chelios99 on April 19, 2021, 09:46:27 AM
Plate jammed when I was loading it and now I am getting this error. Accento S is the model. Has anyone experience this before and how did you get it fixed?
Title: Re: E0133: Time-out error has occured when punch 3 is activated
Post by: DigiCorn on April 23, 2021, 03:54:34 AM
If I recall correctly, we had that issue on our Screen once and it was because the solenoid froze up mid-punch. I don't remember if the guy replaced the solenoid, or just released it from the locked-up position and then a little WD-40 on the punch itself to keep it from sticking again.
Title: Re: E0133: Time-out error has occured when punch 3 is activated
Post by: chelios99 on April 28, 2021, 03:10:09 PM
Took punch out and it was broke. Installed a new punch and all is good now!