Recent

Author Topic: E0133: Time-out error has occured when punch 3 is activated  (Read 637 times)

0 Members and 1 Guest are viewing this topic.

Offline chelios99

  • New Member
  • *
  • Posts: 8
E0133: Time-out error has occured when punch 3 is activated
« on: April 19, 2021, 09:46:27 AM »
Plate jammed when I was loading it and now I am getting this error. Accento S is the model. Has anyone experience this before and how did you get it fixed?

Offline DigiCorn

  • Terrorizing humans since 1971
  • Supreme Ninja
  • ***
  • Posts: 15874
  • Gender: Male
  • There is no Dana, only Zul!
    • Clerks.
Re: E0133: Time-out error has occured when punch 3 is activated
« Reply #1 on: April 23, 2021, 03:54:34 AM »
If I recall correctly, we had that issue on our Screen once and it was because the solenoid froze up mid-punch. I don't remember if the guy replaced the solenoid, or just released it from the locked-up position and then a little WD-40 on the punch itself to keep it from sticking again.
"Selling my soul would be a lot easier if I could just find it."
– Nikki Sixx

“Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”
― Ernest Hemingway

Offline chelios99

  • New Member
  • *
  • Posts: 8
Re: E0133: Time-out error has occured when punch 3 is activated
« Reply #2 on: April 28, 2021, 03:10:09 PM »
Took punch out and it was broke. Installed a new punch and all is good now!