Skip to main content

Recent Topics

xx
Any GMC Inspire users?
by Ear
December 13, 2017, 05:13:27 PM

xx
Temperature of the room your platemaker is in
by born2print
December 13, 2017, 04:53:34 PM

xx

xx
CMYK to PMS_quick & dirty site
by Ear
December 13, 2017, 02:52:27 PM

xx
XMF compatible proofer
by scottrsimons
December 13, 2017, 01:05:46 PM

xx
Pinergy web growth
by Joe
December 12, 2017, 08:16:05 PM

xx
Thoughts on Cannon Imagepress C750
by wonderings
December 11, 2017, 01:30:30 PM

poll

xx

xx
Licensing update issue
by andyfest
December 08, 2017, 10:05:12 AM

xx
Fuji XMF Rip Proof
by frailer
December 07, 2017, 04:27:12 PM


Topic: SCREEN 8600S (Read 995 times) previous topic - next topic

0 Members and 1 Guest are viewing this topic.
SCREEN 8600S
How to set the automatic unload of plate at the back thru the conveyor??

  • DigiCorn
  • [*][*][*]
  • A legend in my own mind
Re: SCREEN 8600S
Reply #1
take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.
"Why is it that everything today has involved things either going in or coming out of my ass?!"
― Eric Cartman

"Oh My God! They Killed Kenny!"
- Stan Marsh

"You Bastards!"
-Kyle Broflovski

"Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."
― Ernest Hemingway

Re: SCREEN 8600S
Reply #2
take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.

That is working what i mean is after recording the plate should be unloaded automatically in the back through the conveyor. how to set like that?

  • Ear
  • [*][*][*]
  • Fiya wata
Re: SCREEN 8600S
Reply #3
Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.
Quote: Skryber  "FreeHand sucks ferocious porcupine balls!"

Quote from: born2print "Well now doesn't that suck petrified possum penis."

Re: SCREEN 8600S
Reply #4
Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.
yes please.

  • Ear
  • [*][*][*]
  • Fiya wata
Re: SCREEN 8600S
Reply #5
This is a picture of my interface screen, on the PT-R8600 (Fuji T-9000). The arrow at the right of the schematic shows a plate actively unloading through the back slot, to the conveyor for developing and stacking.

I am currently (in the picture) running full automation, from the cassette to stacker. Preload is off but it still semi-preloads, as long as my tiff catcher is actively sending. Full P-Load gains me about 6 plates per hour (to 24 from 18), 8-up size plates. I turn P-Load off when switching cassette sizes to save hassle.

This is a still shot but at 6% burn, the big wheel at bottom-right is animated and turning. The arrow at back blinks while the plate is unloading and the top arrow indicates loading a new plate.
  • Last Edit: May 04, 2016, 01:00:41 PM by Ear
Quote: Skryber  "FreeHand sucks ferocious porcupine balls!"

Quote from: born2print "Well now doesn't that suck petrified possum penis."

  • andyfest
  • [*]
  • Know your role and shut your hole...
Re: SCREEN 8600S
Reply #6
Speaking of Screen 8600's we are having problems unloading plates. I found this article at PP that describes our problem to a tee:
http://printplanet.com/forum/prepress-and-workflow/screen/16466-problems-unloading-plates-on-screen-pt-r-8600

Looks like we need to replace a relay (PTR 8600 Relay for Brake - the new part number is: 100090068V00 instead of: 151162) for the drum brake, but I'm having a hard time location the relay in question. Does anyone have a service manual for the 8600 or know where the hell this relay is?
:banghead:
imac & Mac Pros on OSX 10.8.5/Adobe CC2014/Nexus Classic & PDF RIP v10.1.3 on 10.5.6 Mac XServe/Oris ColorTuner RIP w Epson 9900/Fuji_Luxel_T9000

  • Ear
  • [*][*][*]
  • Fiya wata
Re: SCREEN 8600S
Reply #7
Yes, I think I do. I'll dig around and see if I can find it. Standby...
Quote: Skryber  "FreeHand sucks ferocious porcupine balls!"

Quote from: born2print "Well now doesn't that suck petrified possum penis."

  • Ear
  • [*][*][*]
  • Fiya wata
Re: SCREEN 8600S
Reply #8
https://www.dropbox.com/s/e55vp0pkllxjgsk/Screen%20PTR8000%20service%20info.zip?dl=0

Linky. This is mostly ole PT-R8000 stuff, but the Service Drawing 8100 PDF is also valid for most of the 8600. It even says 8600 when you look at the drawings, and I have used these to fix my 8600. Hopefully it helps...
Quote: Skryber  "FreeHand sucks ferocious porcupine balls!"

Quote from: born2print "Well now doesn't that suck petrified possum penis."

  • Ear
  • [*][*][*]
  • Fiya wata
Re: SCREEN 8600S
Reply #9
... Look in the Service Amend Manual, within that ZIP folder. Pages 29-40s show troubleshooting sequence for 8600, as well as a labeled drawing, showing parts and locations. I used this to track down a faulty solenoid not long ago. Put your fuckin' propeller hat on, bro...
Quote: Skryber  "FreeHand sucks ferocious porcupine balls!"

Quote from: born2print "Well now doesn't that suck petrified possum penis."

  • andyfest
  • [*]
  • Know your role and shut your hole...
Re: SCREEN 8600S
Reply #10
Many thanks Ear! I'll update when I have time later but the machine is fixed. The manual helped me to track down a faulty relay.  :banana:
imac & Mac Pros on OSX 10.8.5/Adobe CC2014/Nexus Classic & PDF RIP v10.1.3 on 10.5.6 Mac XServe/Oris ColorTuner RIP w Epson 9900/Fuji_Luxel_T9000