B4Print.com

Applications => The Rest... => Topic started by: Trish on August 20, 2019, 03:15:29 PM

Title: Xante Impressia
Post by: Trish on August 20, 2019, 03:15:29 PM
Filling in for someone this week, and trying to print a #10 envelope. The color and everything looks good, but about 50% of them are coming out crooked. Any suggestions on what I can to to make it hold position a little better?

Thanks in Advance. 
Title: Re: Xante Impressia
Post by: Tracy on August 20, 2019, 04:35:51 PM
Do you have the stacker guide pushed in?
try not to stack too many?
Hopefully somebody more helpful will come along!
Title: Re: Xante Impressia
Post by: Possum on August 21, 2019, 10:02:07 AM
I had this problem to start with because our "trainer" told me we could run envelopes on the lite envelope weight setting to get them to print faster. A Xante tech told me that's false. Solved the problem.

If you have them on the regular envelope weight setting, try the next heavier one. Slowing the printing down helps.
Title: Re: Xante Impressia
Post by: david on August 21, 2019, 11:04:43 AM
I use an OKI for our envelopes, and it's true, slowing it down helps feed them through a bit straighter, especially with slick # 10 envelopes.
The #10 with windows are the worst, the feeder tends to stick slightly to the plastic window causing them to feed in wonky.
Title: Re: Xante Impressia
Post by: DigiCorn on August 21, 2019, 11:27:10 AM
It's all about how you load it. This thing will run crooked if you look at it funny. Also, don't set it for "Envelope Lite" unless you are an expert level user. Use "Envelope," or "Envelope Heavy" to slow it down. If you look at the feeder entrance, there's a spot away from you that sometimes catches the envelope flap and spins it. I use a piece of strapping material taped just above it to push the flap down upon entrance to the machine. It helps a lot.

Make certain that envelopes are all aligned and as straight and packed together (not too tightly) and not 100% flat or too upright. Maybe about a 20-30 degree angle. If they bunch up, turn off the auto feeder conveyor for a minute and flatten them out some more. Lots of good videos on youtube for this machine.
Title: Re: Xante Impressia
Post by: jwheeler on August 21, 2019, 02:30:13 PM
I use an OKI for our envelopes, and it's true, slowing it down helps feed them through a bit straighter, especially with slick # 10 envelopes.
The #10 with windows are the worst, the feeder tends to stick slightly to the plastic window causing them to feed in wonky.

We recently purchased an Oki to print envelopes and we are having alot of trouble with windows. The edge of the window seems to catch on the flap of the envelope above it. Aside from slowing it down, what other tricks do you have to make the windows run better?
Title: Re: Xante Impressia
Post by: david on August 21, 2019, 03:01:46 PM
We have the Straight Shooter feeder, I have to adjust the little foot that puts pressure on the envelopes when they come down the stack. I loosen it up a smidge so that it doesn't press down so hard that it sticks to the window, but then you run the risk of double feeds. I have to keep an eye on it for sure.
Sadly, they positioned that piece right where the window of the envelope is so it is a pain.

Here is our exact setup.
The foot I mentioned is the little yellow thing on the right by the bottom of the stack of env on the feeder (you can barely see it in the attached photo)

(http://uge.co/wp-content/uploads/straightshooter/straightshooter_lfproplus_weblg.jpg)
Title: Re: Xante Impressia
Post by: DigiCorn on August 21, 2019, 03:41:07 PM
For windows, make sure you are using digital envelopes (duh). But this strapping technique may help keep it flat also...
Title: Re: Xante Impressia
Post by: Possum on August 21, 2019, 05:17:39 PM
I had that trouble with windows on an Oki once. It turned out the windows weren't glued to the paper all the way to the edge of the opening. There was about 1/8 inch flap you could raise up all the way around. We switched to another brand of didgi envelopes and that problem cleared up.

Sometimes is actually is the paper.