p01 Kansas City Southern
Skip to main content

Recent Topics

clip
Strange email from "Adobe"
by mc hristel
Today at 06:16:24 PM

xx

xx
Secure delete
by Possum
Today at 11:50:19 AM

xx
Reset Zero Point
by Diddler
July 17, 2018, 06:53:44 PM

xx
Device CMYK
by Joe
July 16, 2018, 01:25:22 PM

xx

clip
Font issue PDF just sits there...
by Diddler
July 15, 2018, 07:28:49 PM

xx

xx
12 page Sheetwork_fixed?
by frailer
July 09, 2018, 11:17:56 PM

xx
remapping colorbars
by frailer
July 09, 2018, 11:13:49 PM

xx
FREE InDesign Scripts
by pabney
July 09, 2018, 09:53:44 AM

xx
Locked PDF - for what it's worth
by Joe
July 07, 2018, 09:20:09 AM

xx
EU Article 13
by born2print
July 05, 2018, 06:14:29 PM

Topic: SCREEN 8600S (Read 1582 times) previous topic - next topic

SCREEN 8600S

How to set the automatic unload of plate at the back thru the conveyor??

Re: SCREEN 8600S

Reply #1
take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.
"I'm not addicted to cocaine. I just like the way it smells."
– Richard Pryor

“Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”
― Ernest Hemingway

Re: SCREEN 8600S

Reply #2
take the machine OFFLINE, and then it depends on the OS running on the pad. Basically, once you get in, there's an icon that looks like a plate coming off the drum, and you press that. In there it has an image of a plate unloading in front (left), and one unloading in back (right). Choose the one that unloads in back and put back online.

That is working what i mean is after recording the plate should be unloaded automatically in the back through the conveyor. how to set like that?

Re: SCREEN 8600S

Reply #3
Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Re: SCREEN 8600S

Reply #4
Corn is correct. I am currently running an 8600. When set to Manual Unload, it will eject through the front door. When set to Automatic Unload, it will spit them out the back slot, to the conveyor. This is how I have it set up.

It will indicate all of the active paths of travel, on the little 8-bit schematic on the display. It uses lines with arrows and circles to represent rollers. It's rudimentary. I can take a pic of my setup, if you need further clarification.
yes please.

Re: SCREEN 8600S

Reply #5
This is a picture of my interface screen, on the PT-R8600 (Fuji T-9000). The arrow at the right of the schematic shows a plate actively unloading through the back slot, to the conveyor for developing and stacking.

I am currently (in the picture) running full automation, from the cassette to stacker. Preload is off but it still semi-preloads, as long as my tiff catcher is actively sending. Full P-Load gains me about 6 plates per hour (to 24 from 18), 8-up size plates. I turn P-Load off when switching cassette sizes to save hassle.

This is a still shot but at 6% burn, the big wheel at bottom-right is animated and turning. The arrow at back blinks while the plate is unloading and the top arrow indicates loading a new plate.
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Re: SCREEN 8600S

Reply #6
Speaking of Screen 8600's we are having problems unloading plates. I found this article at PP that describes our problem to a tee:
http://printplanet.com/forum/prepress-and-workflow/screen/16466-problems-unloading-plates-on-screen-pt-r-8600

Looks like we need to replace a relay (PTR 8600 Relay for Brake - the new part number is: 100090068V00 instead of: 151162) for the drum brake, but I'm having a hard time location the relay in question. Does anyone have a service manual for the 8600 or know where the hell this relay is?
:banghead:
Sweet FA right now.

Re: SCREEN 8600S

Reply #7
Yes, I think I do. I'll dig around and see if I can find it. Standby...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Re: SCREEN 8600S

Reply #8
https://www.dropbox.com/s/e55vp0pkllxjgsk/Screen%20PTR8000%20service%20info.zip?dl=0

Linky. This is mostly ole PT-R8000 stuff, but the Service Drawing 8100 PDF is also valid for most of the 8600. It even says 8600 when you look at the drawings, and I have used these to fix my 8600. Hopefully it helps...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

Re: SCREEN 8600S

Reply #9
... Look in the Service Amend Manual, within that ZIP folder. Pages 29-40s show troubleshooting sequence for 8600, as well as a labeled drawing, showing parts and locations. I used this to track down a faulty solenoid not long ago. Put your fuckin' propeller hat on, bro...
"... profile says he's a seven-foot tall ex-basketball pro, Hindu guru drag queen alien." ~Jet Black

 

Re: SCREEN 8600S

Reply #10
Many thanks Ear! I'll update when I have time later but the machine is fixed. The manual helped me to track down a faulty relay.  :banana:
Sweet FA right now.