p01 Kansas City Southern
Skip to main content

Recent Topics

xx
Time Machine and OS Install
by Joe
Today at 06:21:05 PM

xx

poll
Poll: Work Lighting
by scottrsimons
Today at 01:27:30 PM

xx

xx
New Windows 10 PC
by Tracy
December 10, 2018, 11:37:40 AM

xx
Office 365 Outlook
by frailer
December 09, 2018, 05:13:58 AM

xx
Whole of job corruption upstream?
by frailer
December 09, 2018, 05:10:44 AM

xx
Paper "scam"
by born2print
December 06, 2018, 12:23:25 PM

Topic: How to make type into single stroke for engraving (Read 1141 times) previous topic - next topic

How to make type into single stroke for engraving

Any you guys got any tips or tricks on how to convert type into single strokes for engraving?
You can't just "convert to outlines", it gives you the entire shape.


Prepress guy - doin' jobs one at a time

Re: How to make type into single stroke for engraving

Reply #1
sorry, like this
Prepress guy - doin' jobs one at a time

Re: How to make type into single stroke for engraving

Reply #2
Not sure exactly what you are trying to do. Converting font to outlines will make an outline look like the font you had selected. So in your second post converting that T to the thin type T will not work because they are completely different. Arial "T" when outlined will look just like Arial but will no longer be a font.

Screen Shot 2018-10-12 at 3.25.54 PM by B P, on Flickr

Re: How to make type into single stroke for engraving

Reply #3
For engraving it needs to be a single stroke, not an outline of the font. As in the letter T, the stroke would run down the center of the vertical and the center of the horizontal portions, as in my example.
So the engrave bit, when it chews through the metal, would leave the T looking normal, due to the thickness of the bit.

does this make sense?
Prepress guy - doin' jobs one at a time

Re: How to make type into single stroke for engraving

Reply #4
Does the engraver have a program for that?
very interesting, let us know what you find out!


Re: How to make type into single stroke for engraving

Reply #6
What about doing a choke trap?
Mac OS 10.12 Sierra | Prinergy 7.5 | Adobe Creative Cloud 2017 | Two Luscher XPose 160 CTP units

Prepress: One who does precision guess work based on unreliable data provided by those of questionable knowledge.

Re: How to make type into single stroke for engraving

Reply #7
Not sure, tried a few things but no luck. Would think the software for the engraving would be able to do that as it seems pretty specific to that task.

Not sure if this is a work around that would work but could you use a "light" font ie thin font type and use that to produce a thicker engraving? So light = regular? Not sure how engraving works so might not work at all.

 

Re: How to make type into single stroke for engraving

Reply #8
Does the engraver have a program for that?
very interesting, let us know what you find out!

sadly, we are the engraver... using the Zund, hence the need for the single center line stroke.
Prepress guy - doin' jobs one at a time

Re: How to make type into single stroke for engraving

Reply #9
I was able to do a  "work-a-round"...
In Illustrator, outline the type, select the outline, offset path to some ungodly negative number (basically a major pinch), delete any extra paths and it's a done.
I had 8 different names to do, and of course they all had to have their first, middle and last names.

thanks for all the advice!

 :hangme:      :drunk3:
Prepress guy - doin' jobs one at a time

Re: How to make type into single stroke for engraving

Reply #10
If only that image trace option Pabney posted would work for vector!
It works perfect on an image in illustrator dang it!

Re: How to make type into single stroke for engraving

Reply #11
Does the engraver have a program for that?
very interesting, let us know what you find out!

sadly, we are the engraver... using the Zund, hence the need for the single center line stroke.

We are using OptiScout with our Colex Sharpcut and engrave using the milling and hatching settings.

So we would use an outline of the type. In OptiScout set it up to use the router defined with the diameter of the bit we're using, and set up the rest with milling and hatching.

Zunds being the Cadillacs of cutters surely has something of the sort.
Rampage 11.1 • Preps 5.32 • Fuji Film Sabre P-9600 CTP Platesetter with inline FLP 1260 processor • Rampage •  ManRoland PECOM using CIP3 data • HP DesignJet 5500 42" 6/C • Epson Stylus Pro 9880 • Xerox Docucolor 8000 with Fiery • Mutoh ValueJet 1604 • Océ Arizona 250 GT • Océ Arizona 365 GT • Onyx Production House/THRIVE • ManRoland 700 5/c + coat and 2/3 perfect • and a coupla' Heidelbergs and other stuff

Re: How to make type into single stroke for engraving

Reply #12
Long time no hear!

Not being a Zund operator myself, I don't know about this.
I will surely check into it, thanks Skryber!
Prepress guy - doin' jobs one at a time